Washington Well Data › Pierce County › Graham (98338)
Graham, WA (98338): well depth, water level & drilling cost
✓ 2,174 Ecology records · Pierce County
Pull every recorded well near a Graham (98338) address — $49
How deep are wells in and around Graham (98338), Washington?
The median drilled well depth in and around Graham (98338) is 115 ft, based on 2,162 wells with recorded depths in the state Ecology database. Half fall between 80 ft and 145 ft; 90% are shallower than 195 ft.
How much does it cost to drill a well in and around Graham (98338)?
Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Graham (98338)?
The median static water level is 58 ft below ground surface (middle half of wells: 31 ft–93 ft), from 475 measurements.
Iron staining, rotten-egg smell, hard water, or a failed test at closing — Salish Water Works, a new Puget Sound company, publishes its treatment systems and planned prices up front and specs the fix from your water test. No in-home sales visit. Installation opens Fall 2026; the waitlist is open now and waitlist members get first slot priority.
See planned systems & pricing → salishwaterworks.comDrilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Pierce County.
Part of Pierce County well records.
Method: medians computed from Ecology records (water wells only — soil/environmental borings and decommissions excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.